Tag: MultiScreen

The Journey Multi-Screen

When we decided to transition from one center screen to three screens on stage, we knew that choosing the correct software would be an integral part of the transition. We chose ProPresenter due to its ability to handle multiple screens with ease. We use a 27 inch iMac with an upgraded video card in the tech booth, which runs ProPresenter 5 and the Multi-Screen Module. The iMac feeds a Matrox TripleHead2Go, which splits the signal into three separate outputs. Since… continue reading »

Master Control Module: Three Screen Words on Stage

While we’ve used words keyed over IMAG shots on the side IMAG projections screens for some time, the unfortunate side effect is that all eyes are focused to the right and left of the stage. Utilizing the Master Control Module in ProPresenter 5, we were able to control a secondary ProPresenter machine (Mac Mini) with a TripleHead2Go attached to three LCD displays for which we made a custom mount. This dramatically enhances the worship environment by allowing eyes to center… continue reading »

EWomen Conference Multi Screen Module

For this set-up, I’m using the Matrox TripleHead2Go DP edition to allow me to drive LED walls, a center screen, and lower thirds for IMAG simultaneously with one computer running Propresenter 5. I set the resolution of the Matrox to 4080 x 768 and send three separate signals of 1360 x 768 to the appropriate places. The left output on my computer goes to our video switcher which controls the IMAG screens that flank the stage. During times of music, I’ll… continue reading »